AUTOMATIC CENTER PUNCH (YT-47160)

The index number YT-47160
EAN 5906083007507
Brand Yato
unit PCS
Gross Weight (kg) 0.0900
Master Carton MC 72
Inner Box IB 12
Pal 2520
Length [mm] ca. 140
Material brass, hardened steel
Designed for effectively marking points on hard materials, especially prior to drilling.

Punches are designed for fast, precise marking of points on the workpiece surface, e.g., wood, metal or plastic. They are most commonly used to mark the point before drilling. The so-called scoring facilitates the start of drilling, limiting the adverse effect of the drill moving from the surface of the material.
A mark is produced by striking the sharp end of the punch into the material. The traditional method of scoring involves the use of a hammer. The presented automatic punches mark the material thanks to a strong inner spring moving a steel, hardened pin. Therefore, they eliminate the need to carry a heavy hammer.
The punch does not require charging the spring - it happens automatically. Immediately after pressing the needle to the material and impact, we can repeat the operation by selecting another point.
The punch has a regulatory impact force used to optimally match the hardness of the marked material.
Purpose / Application
For precise, effective marking of points on hard surfaces, e.g., before drilling. Immediately after pressing the needle to the material and impact, we can repeat the operation by selecting another point.
Usage
Press the sharp end of the punch to the material surface and press firmly. This will cause the needle to impact and permanently mark the point.
BODY: BRASS, KNURLED, LENGTH: 125 MM